LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1987 >> Mark VII Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L V8 - VIN [F] & 5.0L Ho V8 - VIN [M] >> Removal & Installation >> Timing Chain >> Removal

Timing Chain: Removal

  1. With crankshaft pulley, front cover and related components removed, align timing marks. See Figure . Remove camshaft sprocket cap screw, washer, fuel pump eccentric and spacer (if equipped). Inspect chain as outlined below.
  2. Slide both sprockets with timing chain forward and remove them as an assembly. Inspect timing chain and sprockets for worn gear teeth, stretched chain or damaged components.
scientia non olet · About LEMON Manuals