LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1987 >> Mark VII Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L V8 - VIN [F] & 5.0L Ho V8 - VIN [M] >> Removal & Installation >> Rear Main Bearing Oil Seal >> Removal

Rear Main Bearing Oil Seal: Removal

  1. With transmission and related components removed, punch hole into seal metal surface between seal lip and engine block with sharp awl.
  2. Screw in threaded end of Slide Hammer (T77L-9533-B1). Use slide hammer to remove seal. Use caution to avoid scratching or damaging oil seal surface.
scientia non olet · About LEMON Manuals