LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1987 >> Mark VII Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L V8 - VIN [F] & 5.0L Ho V8 - VIN [M] >> Removal & Installation >> Oil Pump >> Reassembly

Oil Pump: Reassembly

  1. Clean, inspect and oil all parts thoroughly. Install relief valve plunger, spring and new cap. Install outer race and inner rotor and shaft assembly.
  2. Install oil pump end cover and tighten bolts. Install oil inlet tube on pump.
CAUTION: Do not attempt to force oil pump into position if it will not seat readily. The drive shaft hex may be misaligned with distributor shaft. To align, rotate intermediate drive shaft into new position.
scientia non olet · About LEMON Manuals