LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1987 >> Mark VII Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L V8 - VIN [F] & 5.0L Ho V8 - VIN [M] >> Removal & Installation >> Oil Pan >> Mustang

Oil Pan: Mustang

  1. Disconnect negative battery cable. Remove fan shroud bolts and position shroud over fan. Remove engine oil dipstick tube assembly. Raise and support vehicle. Drain crankcase and disconnect steering flex coupling.
  2. Remove steering gear to main crossmember bolts and let steering gear rest on frame. Remove nuts and washers from engine mounts to No. 2 crossmember and disconnect transmission cooler lines. Raise engine and place support blocks between engine mounts and No. 2 crossmember.
  3. Remove flywheel access cover and rear "K" braces. Remove oil pan bolts and lower oil pan to frame. Remove oil pump bolts and inlet tube attaching nut. Lower oil pump into pan. Remove oil pan, rotating crankshaft if necessary to clear oil Pan.
scientia non olet · About LEMON Manuals