LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1987 >> Mark VII Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L V8 - VIN [F] & 5.0L Ho V8 - VIN [M] >> Removal & Installation >> Cylinder Head >> Notes

Cylinder Head: Notes

NOTE: Cylinder head should only be removed when engine is cold. Check cylinder head for warped gasket surface, nicks or damage. If cylinder head refinishing is needed, DO NOT machine more than .010" (.25 mm) from gasket surface. Replace head if cracked. Remove burrs or scratches with an oil stone.