LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1987 >> Mark VII Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L V8 - VIN [F] & 5.0L Ho V8 - VIN [M] >> Removal & Installation >> Camshaft >> Installation

Removal & Installation: Camshaft: Installation

  1. Oil camshaft journals with engine oil and apply Lubriplate to camshaft lobes. Carefully slide camshaft through bearings and install camshaft thrust plate with groove toward cylinder block.
  2. Lubricate lifters and lifter bores with oil and install in same order as removal. Apply polyethylene grease or Lubriplate to push rod ends and install in proper positions. Lubricate rocker arms and install.
  3. If any valve train components have been replaced, perform valve clearance adjustment. Install other components previously removed to complete installation.
scientia non olet · About LEMON Manuals