LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1987 >> Mark VII Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Removal & Installation >> Non-Volatile Memory Module

Non-Volatile Memory Module

  1. Remove instrument cluster. Remove screw retaining module cable connector to back of EIM. Remove cable from under 2 retaining tabs. Remove connector.
  2. On Continental, remove 5 screws retaining mask to instrument cluster and lower backplate. On Mark VII, remove extra cable stored in lower backplate. On all models, remove module retaining screws. Remove module by lifting mounting tab upward to disengage. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals