LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 1978 >> Versailles >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 302", 351" & 400" V8 Engines >> Cylinder Head & Manifolds >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Remove intake manifold and carburetors as an assembly. Remove rocker arm covers.
  2. Disconnect A/C compressor and position to one side. Do not disconnect refrigerant lines. Disconnect power steering pump and bracket, remove drive belt from pump pulley and position to one side. Remove alternator mounting bracket bolt, air cleaner inlet duct and ignition coil.
  3. Disconnect exhaust pipe at manifold. On some engines it may be necessary to remove exhaust manifold to gain access to lower cylinder head bolts. Remove push rods. On 302" engines, remove exhaust valve stem caps. Remove cylinder head.
scientia non olet · About LEMON Manuals