LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Engine Intake / Exhaust System - Service Information) >> Radiator >> Removal [11/2021 - 03/2024] >> Procedure

Removal [11/2021 - 03/2024]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN COOLANT (for Intercooler) 

    Refer to REPLACEMENT [11/2021 - ]

  2. REMOVE RADIATOR ASSEMBLY 

    Refer to REMOVAL [11/2021 - ]

  3. DISCONNECT NO. 1 INTERCOOLER COOLING WATER HOSE 
    1. GTY1078125Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. DISCONNECT NO. 5 INTERCOOLER COOLING WATER HOSE 
    1. GTY1078133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE INTERCOOLER COOLING RADIATOR ASSEMBLY 
    1. GTY1077767Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Detach the 2 clamps.
        NOTE:

        Do not apply any excessive force to the cooler condenser assembly and cooler pipe.

      2. Move the cooler condenser assembly upward and detach the 2 connections between the intercooler cooling radiator assembly and cooler condenser assembly.
        NOTE:

        Do not apply any excessive force to the cooler condenser assembly and cooler pipe.

    2. GTY1078332Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Move the cooler condenser assembly LH toward the front of the vehicle and pull up the intercooler cooling radiator assembly to remove it.
        NOTE:
        • Do not apply any excessive force to the cooler condenser assembly and cooler pipe.
        • Do not move the cooler condenser assembly toward the front of the vehicle more than necessary.
scientia non olet · About LEMON Manuals