LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Engine Intake / Exhaust System - Service Information) >> INTERCOOLER >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN ENGINE COOLANT 

    Refer to PROCEDURE - Step 4

  2. DRAIN COOLANT (for Intercooler) 

    Refer to REPLACEMENT [11/2021 - ]

  3. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 25 [11/2021 - 03/2023] , or refer to PROCEDURE - Step 25 [03/2023 - 03/2024] , or refer to PROCEDURE - Step 25 [03/2024 - ]
  4. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY 
    1. GTY1079511Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE 

    See step  16

  6. DISCONNECT ENGINE WIRE 
    1. GTY1078191Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE PURGE VALVE (PURGE VSV) 

    See step  13

  8. REMOVE AIR TUBE ASSEMBLY 
    1. GTY1078098Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using an 8 mm socket wrench, remove the 4 bolts and air tube assembly from the intercooler assembly.
      2. Remove the air tube gasket from the intercooler assembly.
  9. REMOVE FUEL DELIVERY GUARD 
    1. GTY1078948Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. DISCONNECT NO. 2 FUEL VAPOR FEED HOSE 
    1. GTY1078152Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. DISCONNECT NO. 1 TURBO WATER HOSE 
    1. GTY1078153Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. DISCONNECT NO. 1 INTERCOOLER COOLING WATER HOSE 
    1. GTY1078159Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. DISCONNECT NO. 3 WATER BY-PASS HOSE 
    1. GTY1078161Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. DISCONNECT NO. 5 WATER BY-PASS HOSE (Type A) 
    1. GTY1078157Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. DISCONNECT NO. 4 TURBO WATER HOSE 
    1. GTY1078158Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. DISCONNECT NO. 2 INTERCOOLER COOLING WATER HOSE 
    1. GTY1078162Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  17. DISCONNECT NO. 4 WATER BY-PASS HOSE 
    1. GTY1078168Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. DISCONNECT NO. 5 WATER BY-PASS HOSE (Type B) 
    1. GTY1079490Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE 
    Refer to PROCEDURE - Step 13 [11/2021 - 03/2024] , or refer to PROCEDURE - Step 13 [03/2024 - ]
  20. REMOVE INTAKE MANIFOLD WITH INTERCOOLER ASSEMBLY 
    1. GTY1078171Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  21. REMOVE NO. 7 INTERCOOLER COOLING WATER HOSE 
    1. GTY1078223Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY1078227Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  22. REMOVE NO. 6 INTERCOOLER COOLING WATER HOSE 
    1. GTY1080375Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY1080377Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  23. REMOVE INTERCOOLER ASSEMBLY 
    1. GTY1078588Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 4 nuts and bolts to separate the intercooler assembly from the intake manifold and No. 2 air tube.
      2. Using an 8 mm socket wrench, remove the bolt and No. 2 turbo pressure sensor from the intercooler assembly.
      3. Remove the No. 2 air tube gasket from the intercooler assembly.
      4. Remove the No. 1 intake manifold to head gasket from the intake manifold.
scientia non olet · About LEMON Manuals