Removal [11/2021 - 03/2023]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.

PRECAUTION

NOTE:

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.

Refer to BEFORE DISCONNECTING BATTERY [11/2021 - ]

DISCHARGE FUEL SYSTEM PRESSURE
Refer to PRECAUTION [11/2021 - ]
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Refer to PROCEDURE - Step 2
REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Refer to PROCEDURE - Step 25

REMOVE NO. 2 FUEL PRESSURE SENSOR HOLDER

Disconnect the No. 2 fuel pressure sensor connector.
Using an 8 mm socket wrench, remove the bolt and No. 2 fuel pressure sensor holder from the fuel delivery pipe.

REMOVE NO. 2 FUEL PRESSURE SENSOR