Caution / Notice / Hint
WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Refer to PRECAUTION [11/2021 - ]
COMPONENTS (INSTALLATION)
Fig 1: Fuel Pressure Sensor (For High Pressure) Installation Components With Torque Specifications [11/2021 - 03/2023]
| Callout - Procedure | Part Name Code | ||||
|---|---|---|---|---|---|
| 1 | FUEL PRESSURE SENSOR | 89458 | See step 1 | - | - |
| 2 | NO. 1 FUEL PRESSURE SENSOR HOLDER | 23851 | See step 2 | - | - |
| 3 | NO. 1 ENGINE COVER SUB-ASSEMBLY | 12601B | See step 3 | - | - |
| 4 | CONNECT CABLE TO NEGATIVE BATTERY TERMINAL | - | - | - | - |
| 5 | INSPECT FOR FUEL LEAK | - | - | - | See step 5 |
| 6 | PERFORM INITIALIZATION | - | - | - | See step 6 |
| 7 | INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL | - | - | - | See step 7 |
| Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N.m (kgf/cm, ft.lbf) | • | Non-reusable part |