Installation [11/2021 - ]: Procedure
WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL PURGE VALVE (PURGE VSV)
Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
- CONNECT FUEL VAPOR FEED HOSE ASSEMBLY
- CONNECT FUEL VAPOR FEED HOSE ASSEMBLY
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
| *a |
Up |
*b |
Front |
| *c |
120° (Clip tab area) |
*d |
2 to 7 mm (0.0787 to 0.276 in.) |
- Connect the fuel vapor feed hose assembly to the purge valve (purge VSV) and slide the clip to secure it.
HINT:
Engage the clip within the area shown in the illustration.