LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Fuel System - Service Information) >> Fuel Pump Ecu >> Installation [11/2021 - ] >> Procedure

Installation [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL PUMP CONTROL ECU BRACKET 

    Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

  2. INSTALL FUEL PUMP CONTROL ECU 

    Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

  3. INSTALL REAR SEAT SIDE GARNISH LH 
  4. INSTALL NO. 1 SIDE TRIM BASE COVER LH 
  5. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP 
  6. INSTALL REAR DOOR SCUFF PLATE LH 
  7. INSTALL REAR SEAT ASSEMBLY 
    1. for Manual Seat:

      Refer to INSTALLATION [11/2021 - ]

    2. for Power Seat:

      Refer to INSTALLATION [11/2021 - ]

  8. INSTALL DECK BOARD ASSEMBLY 
  9. INSTALL TONNEAU COVER ASSEMBLY 
scientia non olet · About LEMON Manuals