LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Fuel System - Service Information) >> Fuel Main Valve >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FUEL PUMP 

    Refer to DISASSEMBLY [11/2021 - ] 

  2. REMOVE NO. 2 FUEL MAIN VALVE ASSEMBLY 
    1. GTY1075260Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the clip from the fuel filter.
      2. Using a screwdriver with its tip wrapped with protective tape, remove the No. 2 fuel main valve assembly from the fuel filter.
        NOTE:
        • Pull out the No. 2 fuel main valve assembly carefully because the O-rings are firmly installed between the No. 2 fuel main valve assembly and fuel filter.
        • Do not damage the fuel filter.
      3. Remove the 2 O-rings from the No. 2 fuel main valve assembly.
  3. REMOVE FUEL MAIN VALVE ASSEMBLY 
    1. GTY1075290Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the clip from the fuel filter.
      2. Using a screwdriver with its tip wrapped with protective tape, remove the fuel main valve assembly from the fuel filter.
        NOTE:
        • Pull out the fuel main valve assembly carefully because the O-rings are firmly installed between the fuel main valve assembly and fuel filter.
        • Do not damage the fuel filter.
      3. Remove the 2 O-rings from the fuel main valve assembly.
scientia non olet · About LEMON Manuals