Inspection [11/2021 - ]: Procedure
WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT FUEL (ENGINE ROOM SIDE) PUMP ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 0.45 to 0.55 Ω If the result is not as specified, replace the fuel (engine room side) pump assembly.
*a Component without harness connected
(Fuel (Engine Room Side) Pump Assembly)
- Measure the resistance according to the value(s) in the table below.