LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Stop And Start System - Diagnostic Codes (2 Of 2) & Circuit Tests (1 Of 3)) >> Stop And Start System >> DTC P2796-14: Electromagnetic Oil Pump Circuit Open [11/2021 - 03/2023] >> Description

DTC P2796-14: Electromagnetic Oil Pump Circuit Open [11/2021 - 03/2023]: Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Lexus NX 350, 2025 Lexus NX 250, 2024 Lexus NX 350, 2024 Lexus NX 250, and 2023 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P2796-12.

Refer to DESCRIPTION 

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Memory Note
P2796-14 Electromagnetic Oil Pump Circuit Open Both of the following conditions are met for 0.16 seconds or more (2 trip detection logic):
  • During oil pump with solenoid assembly preliminary check: First time vehicle speed reaches 2 km/h (1.2 mph) or higher once per driving cycle (Tr1: On, Tr2: Off).
  • EGND terminal voltage below 1 V.
  • Wire harness or connector
  • Transmission wire
  • oil pump with solenoid assembly
  • Engine stop and start ECU
Blinks DTC stored SAE Code: P2798