LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Stop And Start System - Diagnostic Codes (1 Of 2)) >> Stop And Start System >> DTC P0942-96: Hydraulic Pressure Unit Component Internal Failure [11/2021 - 03/2023] >> Description

DTC P0942-96: Hydraulic Pressure Unit Component Internal Failure [11/2021 - 03/2023]: Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Lexus NX 350, 2025 Lexus NX 250, 2024 Lexus NX 350, 2024 Lexus NX 250, and 2023 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P2796-12.

Refer to DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Note
P0942-96 Hydraulic Pressure Unit Component Internal Failure The following condition continues for 0.032 seconds or more (2 trip detection logic):
  • Difference between turbine speed and output shaft speed is 330 rpm or more within 0.2 seconds after engine restarted during idling stop when shift lever is in D.
  • Oil pump with solenoid assembly
  • Engine stop and start ECU
Blinks SAE Code: P0942