LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Stop And Start System - Diagnostic Codes (1 Of 2)) >> Stop And Start System >> DTC P062F-44: Internal Control Module EEPROM Data Memory Failure [03/2024 - ] >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Lexus NX 350, 2025 Lexus NX 250, 2024 Lexus NX 350, 2024 Lexus NX 250, and 2023 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
CASE 1

The following condition is met 2 data or more
One of the following conditions (a), (b) or (c) is met More than 3 times
(a) EEPROM access error Occurred
(b) Permanent Fault Code Not stored
(c) Permanent Fault Code Not equal to commanded Fault Code
CASE 2

The following condition is met 2 data or more
Either of the following conditions (a) or (b) is met More than 3 times
(a) EEPROM access error Occurred
(b) Permanent Fault Code Stored
CASE 3

Either of the following conditions (a) or (b) is met -
(a) The following condition is met 2 data or more
EEPROM access error (more than 3 times) Occurred
(b) Permanent Fault Code data (more than 10 times) Mismatch