LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Stop And Start System - Diagnostic Codes (1 Of 2)) >> Stop And Start System >> DTC P0615-62: Starter Relay Signal Compare Failure [11/2021 - 03/2023] >> Description

DTC P0615-62: Starter Relay Signal Compare Failure [11/2021 - 03/2023]: Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Lexus NX 350, 2025 Lexus NX 250, 2024 Lexus NX 350, 2024 Lexus NX 250, and 2023 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.

When the STA signal detected by the ECM and by the engine stop and start ECU do not match, the engine stop and start ECU stores DTC P0615-62 and blinks the stop and start cancel indicator.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Note
P0615-62 Starter Relay Signal Compare Failure Both of the following conditions are met for 2 seconds or more (1 trip detection logic):
  • Normal communication with the ECM.
  • The STA signal detected by the ECM and STA signal detected by the engine stop and start ECU do not match.
  • Wire harness or connector
  • ST NO. 1 relay
  • Engine stop and start ECU
  • ECM
Blinks SAE Code: P0615