Caution / Notice / Hint

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.

COMPONENTS (INSTALLATION)

Fig 1: Starter Installation Components With Torque Specifications (1 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
1	STARTER ASSEMBLY	28100	-	-	-
2	FLYWHEEL HOUSING SIDE COVER	11363A	See step 2	-	-
3	ENGINE WIRE	82121	-	-	-
4	INTAKE MANIFOLD WITH INTERCOOLER ASSEMBLY	-	-	-	-
5	AIR CLEANER HOSE ASSEMBLY	17880	See step 5	-	-
6	NO. 2 VENTILATION HOSE	12262	See step 6	-	-

*1	NO. 2 ENGINE WIRE	-	-
	Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N.m (kgf/cm, ft.lbf)		N.m (kgf/cm, ft.lbf): Specified torque

Fig 2: Starter Installation Components With Torque Specifications (2 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
7	AIR CLEANER ASSEMBLY	17700	See step 7	-	-
8	INLET AIR CLEANER ASSEMBLY	17750A	See step 8	-	-
9	RADIATOR UPPER AIR GUIDE PLATE	16681A	-	-	-

N.m (kgf/cm, ft.lbf): Specified torque

Fig 3: Starter Installation Components With Torque Specifications (3 Of 3)

Callout - Procedure		Part Name Code
10	NEGATIVE BATTERY TERMINAL	-	-	-	-
11	ADD COOLANT (for Intercooler)	-	-	See step 11	-
12	ADD ENGINE COOLANT	-	-	See step 12	-
13	INSPECT FOR COOLANT LEAK (for Intercooler)	-	-	-	See step 13
14	INSPECT FOR COOLANT LEAK	-	-	-	See step 14
15	NO. 2 ENGINE UNDER COVER ASSEMBLY	51420	-	-	-
16	NO. 1 ENGINE UNDER COVER	51441	-	-	-
17	FRONT FENDER FRONT SPLASH SHIELD LH	53896B	-	-	-
18	FRONT FENDER FRONT SPLASH SHIELD RH	53895B	-	-	-
19	INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL	-	-	-	-

N.m (kgf/cm, ft.lbf): Specified torque