LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Smart Access System (For Start) - Diagnostic Codes & Symptom Tests (1 Of 2)) >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function, Gasoline Model) >> DTC B278D-96: ID-BOX Component Internal Failure [11/2021 - ] >> Procedure

DTC B278D-96: ID-BOX Component Internal Failure [11/2021 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Lexus NX 350, 2025 Lexus NX 250, 2024 Lexus NX 350, 2024 Lexus NX 250, and 2023 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CLEAR DTC 
    1. Clear the DTCs.

      Body Electrical > Smart Access > Clear DTCs 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  2

  2. CHECK DTC OUTPUT 
    1. Check for DTCs.

      Body Electrical > Smart Access > Trouble Codes 

      HINT: 

      Before checking for DTCs, perform the "DTC Output Confirmation Operation" procedure.

      Result

      Result Proceed to
      B278D-96 is not output A
      B278D-96 is output B

    Result: 

    END 

    Result: 

    REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY). Refer to  REMOVAL [11/2021 - ]