DTC B2285-62: Steering Lock Position Signal Compare Failure [11/2021 - 03/2023]: Description
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Lexus NX 350, 2025 Lexus NX 250, 2024 Lexus NX 350, 2024 Lexus NX 250, and 2023 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
This DTC is stored when the steering lock position signal sent by the steering lock ECU (steering lock actuator with ECU assembly) via direct line and the steering lock position signal sent via LIN communication do not match.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|
| B2285-62 | Steering Lock Position Signal Compare Failure | The steering lock position signal sent by the steering lock ECU (steering lock actuator with ECU assembly) via direct line and the steering lock position signal sent via LIN communication do not match. (1-trip detection logic*) |
|
Power Source Control | B | DTC Output Confirmation Operation:
|
- *: Only detected while a malfunction is present and the ignition switch is ON.
VEHICLE CONDITION AND FAIL-SAFE FUNCTION WHEN MALFUNCTION DETECTED
| Vehicle Condition when Malfunction Detected | Fail-safe Function when Malfunction Detected |
|---|---|
| The engine cannot be started. | The ECU does not send an engine start request. |
RELATED DATA LIST AND ACTIVE TEST ITEMS
| DTC No. | Data List and Active Test |
|---|---|
| B2285-62 | Power Source Control
Smart Access
|