LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Automatic Transaxle System - Service Information (4 Of 4)) >> UB80E Differential Case >> Disassembly [11/2021 - ] >> Procedure

Disassembly [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (OUTER RACE) 
    1. GTY1061180Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using SST, remove the front differential case rear tapered roller bearing (outer race) from the automatic transaxle case sub-assembly.
        • SST: 09308-36010 
        NOTE:

        Be careful not to damage the automatic transaxle case sub-assembly.

        HINT: 

        Align the claw of SST with the indentation of the automatic transaxle case sub-assembly when removing the parts.

  2. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (INNER RACE) 
    1. GTY1060584Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using SST, remove the front differential case rear tapered roller bearing (inner race) from the differential case assembly.
        • SST: 09950-40011 
          1. 09951-04010
          2. 09952-04010
          3. 09953-04030
          4. 09954-04020
          5. 09955-04011
          6. 09957-04010
          7. 09958-04011
        • SST: 09950-60011 
          1. 09951-00340
          2. 09951-00440
          3. 09952-06010
        NOTE:

        Because SST is attached to the roller portion, there is a possibility that the roller portion could break and SST could come off before the front differential case rear tapered roller bearing (inner race) comes off.

      2. If the roller portion breaks and SST comes off, reattach SST to the inner race in the position shown in the illustration, and continue removing the parts.
        • SST: 09950-40011 
          1. 09951-04010
          2. 09952-04010
          3. 09953-04030
          4. 09954-04020
          5. 09955-04011
          6. 09957-04010
          7. 09958-04011
        • SST: 09950-60011 
          1. 09951-00340
          2. 09951-00440
          3. 09952-06010
  3. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (OUTER RACE) 
    1. GTY1061064Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using SST, remove the front differential case front tapered roller bearing (outer race) and differential drive pinion shim from the transaxle housing.
        • SST: 09308-36010 
        NOTE:

        Be careful not to damage the transaxle housing.

        HINT: 

        Align the claw of SST with the indentation of the transaxle housing when removing the parts.

  4. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (INNER RACE) 
    1. GTY1060459Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using SST, remove the front differential case front tapered roller bearing (inner race) from the differential case assembly.
        • SST: 09950-00020 
        • SST: 09950-00030 
        • SST: 09950-60011 
          1. 09951-00440
scientia non olet · About LEMON Manuals