Caution / Notice / Hint

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.

COMPONENTS (INSTALLATION)

Fig 1: Flow Shutting Valve (For ATF) Installation Components With Torque Specifications (1 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
1	FLOW SHUTTING VALVE (NO. 1 WATER BY-PASS HOSE)	16261G	See step 1	-	-

*1	TRANSMISSION BREATHER CLAMP	*2	HOSE CLAMP
	N.m (kgf/cm, ft.lbf): Specified torque	-	-

Fig 2: Flow Shutting Valve (For ATF) Installation Components With Torque Specifications (2 Of 3)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout - Procedure		Part Name Code
2	BATTERY CLAMP SUB-ASSEMBLY	74404B	-	-	-
3	BATTERY	28800	-	-	-
4	ECM	89661	-	-	-

N.m (kgf/cm, ft.lbf): Specified torque

Fig 3: Flow Shutting Valve (For ATF) Installation Components With Torque Specifications (3 Of 3)

Callout - Procedure		Part Name Code
5	ADD ENGINE COOLANT	-	-	See step 5	-
6	INSPECT FOR COOLANT LEAK	-	-	-	See step 6
7	FRONT FENDER APRON SEAL LH	53737D	-	-	-
8	NO. 2 ENGINE UNDER COVER ASSEMBLY	51420	-	-	-
9	NO. 1 ENGINE UNDER COVER	51441	-	-	-
10	FRONT FENDER FRONT SPLASH SHIELD LH	53896B	-	-	-
11	FRONT FENDER FRONT SPLASH SHIELD RH	53895B	-	-	-
12	FRONT WHEEL LH	-	-	-	-

N.m (kgf/cm, ft.lbf): Specified torque