Removal [11/2021 - 03/2024]: Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Lexus NX 350, 2025 Lexus NX 250, 2024 Lexus NX 350, 2024 Lexus NX 250, and 2023 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE TONNEAU COVER ASSEMBLY
Refer to PROCEDURE - Step 1
- REMOVE DECK BOARD ASSEMBLY
Refer to PROCEDURE - Step 2
- REMOVE REAR SEAT ASSEMBLY
- for Manual Seat:
Refer to REMOVAL [11/2021 - ]
- for Power Seat:
Refer to REMOVAL [11/2021 - ]
- for Manual Seat:
- REMOVE REAR DECK FLOOR BOX (w/o Spare Tire)
Refer to PROCEDURE - Step 7
- REMOVE REAR FLOOR BOARD REAR RH
Refer to PROCEDURE - Step 8
- REMOVE REAR FLOOR BOARD REAR LH
Refer to PROCEDURE - Step 10
- REMOVE DECK FLOOR BOX RH
Refer to PROCEDURE - Step 11
- REMOVE DECK FLOOR BOX LH
Refer to PROCEDURE - Step 12
- REMOVE REAR DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 21
- REMOVE REAR FLOOR FINISH PLATE
Refer to PROCEDURE - Step 34
- DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH
Refer to PROCEDURE - Step 22
- REMOVE NO. 1 SIDE TRIM BASE COVER LH
Refer to PROCEDURE - Step 35
- REMOVE REAR SEAT SIDE GARNISH LH
Refer to PROCEDURE - Step 37
- REMOVE ROPE HOOK ASSEMBLY
Refer to PROCEDURE - Step 39 - REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY
- REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
Refer to PROCEDURE - Step 41 - REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
Refer to PROCEDURE - Step 42 - REMOVE 4WD ECU ASSEMBLY (for A25A-FKS)
- REMOVE 4WD ECU ASSEMBLY (for T24A-FTS)