LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Stop And Start System Cancel Switch Assembly - Service Information) >> Stop And Start System Cancel Switch Assembly >> Inspection [11/2021 - ] >> Procedure

Inspection [11/2021 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Lexus NX 350, 2025 Lexus NX 250, 2024 Lexus NX 350, 2024 Lexus NX 250, and 2023 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT ECO RUN CANCEL SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) 
    1. Measure the resistance according to the value(s) in the table below.
      GTY1063668Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Eco Run Cancel Switch (Electric Parking Brake Switch Assembly))

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      D23-4 (S) - D23-7 (E) Eco run cancel switch (electric parking brake switch assembly) being pushed and held Below 1 Ω
      Eco run cancel switch (electric parking brake switch assembly) not pushed 10 kΩ or higher

      If the result is not as specified, replace the eco run cancel switch (electric parking brake switch assembly).

scientia non olet · About LEMON Manuals