LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Engine Lubrication System - Service Information) >> Oil Pump >> Installation [11/2021 - ] >> Procedure

Installation [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ENGINE BALANCER ASSEMBLY 

    Refer to PROCEDURE - Step 6 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 6 [03/2022 - ]

  2. INSTALL STIFFENING CRANKCASE ASSEMBLY 
    Refer to PROCEDURE - Step 7 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 7 [03/2022 - ]
  3. INSTALL OIL PUMP ASSEMBLY 

    Torque: 24 N.m (245 kgf/cm, 18 ft.lbf) 

  4. INSTALL OIL PUMP BRACKET 

    Refer to PROCEDURE - Step 9 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 9 [03/2022 - ]

  5. INSTALL ENGINE OIL LEVEL SENSOR 
    Refer to PROCEDURE - Step 10 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 10 [03/2022 - ]
  6. INSTALL OIL STRAINER SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 11 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 11 [03/2022 - ]
  7. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 12 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 12 [03/2022 - ]
  8. INSTALL TIMING CHAIN COVER ASSEMBLY 

    Refer to REMOVAL [11/2021 - 03/2022] , or refer to REMOVAL [03/2022 - 03/2024] , or refer to REMOVAL [03/2024 - ]

scientia non olet · About LEMON Manuals