LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Engine Control System - Service Information) >> Ignition Coil And Spark Plug >> Removal [03/2023 - ] >> Procedure

Removal [03/2023 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 25 [03/2023 - 03/2024] , or refer to PROCEDURE - Step 25 [03/2024 - ]
  2. REMOVE NO. 3 ENGINE COVER 

    Refer to PROCEDURE - Step 26 [03/2023 - 03/2024] , or refer to PROCEDURE - Step 26 [03/2024 - ]

  3. DISCONNECT ENGINE WIRE 
    1. GTY1077404Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE IGNITION COIL ASSEMBLY 
    1. GTY1077089Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Using an 8 mm socket wrench, remove the 4 bolts and 4 ignition coil assemblies from the cylinder head cover sub-assembly.
        NOTE:

        If an ignition coil assembly has been struck or dropped, replace it.

  5. REMOVE SPARK PLUG 
    Refer to PROCEDURE - Step 5
scientia non olet · About LEMON Manuals