LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Engine Control System - Service Information) >> Engine Oil Temperature Sensor >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ENGINE OIL TEMPERATURE SENSOR 
    1. GTY1076564Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the engine oil temperature sensor connector.
      2. Using SST, remove the engine oil temperature sensor from the cylinder block sub-assembly.
        • SST: 09817-33191 
        NOTE:

        If the engine oil temperature sensor has been struck or dropped, replace it.

      3. Remove the gasket from the engine oil temperature sensor.
scientia non olet · About LEMON Manuals