On-Vehicle Inspection [11/2021 - ]: Procedure
WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY
Refer to REMOVAL [11/2021 - ]
- INSPECT INTAKE CAMSHAFT TIMING GEAR BOLT ASSEMBLY
- Check the stroke of the plunger in the center of the intake camshaft timing gear bolt assembly.
Standard Stroke
2.2 mm (0.0866 in.) or more
If the result is not as specified, replace the intake camshaft timing gear bolt assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- INSPECT EXHAUST CAMSHAFT TIMING GEAR BOLT ASSEMBLY
- Check the stroke of the plunger in the center of the exhaust camshaft timing gear bolt assembly.
Standard Stroke
2.2 mm (0.0866 in.) or more
If the result is not as specified, replace the exhaust camshaft timing gear bolt assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY
Refer to INSTALLATION [11/2021 - ]