LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Control System - Service Information) >> VACUUM SWITCHING VALVE (for Engine Mounting) >> Installation [11/2021 - ] >> Procedure

Installation [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL VACUUM SWITCHING VALVE (for Active Control Engine Mount System) 

    Torque: 6.0 N.m (61 kgf/cm, 53 in.lbf) 

  2. CONNECT VACUUM HOSE 
  3. INSTALL WIRE HARNESS CLAMP BRACKET 

    Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

  4. CONNECT ENGINE WIRE 

    Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

  5. INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE 
    See step  5
  6. CONNECT NO. 2 VENTILATION HOSE 
    See step  6
  7. CONNECT VACUUM HOSE 
  8. INSTALL INLET AIR CLEANER ASSEMBLY 
    See step  8
  9. INSTALL RADIATOR UPPER AIR GUIDE PLATE 
  10. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 48
scientia non olet · About LEMON Manuals