On-Vehicle Inspection [11/2021 - 03/2022]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY
Refer to REMOVAL [11/2021 - ]

INSPECT CAMSHAFT TIMING VALVE ASSEMBLY

Check the stroke of the plunger in the center of the camshaft timing valve assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Plunger

Standard Stroke

2.2 mm (0.0866 in.) or more

If the result is not as specified, replace the camshaft timing valve assembly.

INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY
Refer to INSTALLATION [11/2021 - ]