LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Control System - Service Information) >> ACTIVE CONTROL ENGINE MOUNT (for Rear Side) >> Removal [11/2021 - 03/2024] >> Procedure

Removal [11/2021 - 03/2024]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT FRAME ASSEMBLY 

    Refer to REMOVAL [11/2021 - 03/2024]

  2. REMOVE REAR ENGINE MOUNTING INSULATOR 
    1. GTY1076624Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE NO. 3 WIRING HARNESS CLAMP BRACKET 
    1. GTY1076617Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. DISCONNECT VACUUM HOSE 
    1. GTY1077467Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals