LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Stop And Start System - Service Information) >> Vacuum Sensor Assembly >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2025 Lexus NX 350, 2025 Lexus NX 250, 2024 Lexus NX 350, 2024 Lexus NX 250, and 2023 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECAUTION 
    NOTE:
    • After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.

      Refer to BEFORE DISCONNECTING BATTERY [11/2021 - ]

    • When replacing the battery, use a new battery of the same dimensions and same capacity or more from the same class at a 20-hour rate.
  2. REMOVE BATTERY 
  3. REMOVE VACUUM SENSOR ASSEMBLY 
    1. GTY1078542Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE VACUUM SENSOR GROMMET 
    1. GTY1078540Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002