LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Engine Control System - Diagnostic Codes (P2418-U1103)) >> SFI System >> DTC U0101-87: Lost Communication with TCM Missing Message [03/2022 - ] >> Procedure

DTC U0101-87: Lost Communication with TCM Missing Message [03/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC U0101-87) 
    1. Enter the following menus: System Select / Health Check.
    2. Read the DTCs.

      Result

      Result Proceed to
      DTC U0101-87 is output A
      DTC U0101-87 and other DTCs are output B

      HINT: 

      If any DTCs other than U0101-87 are output, troubleshoot those DTCs first.

    Result: 

    REPLACE ECM. Refer to  REMOVAL [11/2021 - ] 

    Result: 

    GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [03/2022 - 03/2023]  , or Refer to  DIAGNOSTIC TROUBLE CODE CHART [03/2023 - 03/2024]  , or Refer to  DIAGNOSTIC TROUBLE CODE CHART [03/2024 - ]