DTC P0630-51: VIN Not Programmed [03/2022 - ]: Procedure
WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630-51)
- Connect the GTS to the DLC3.
- Read the DTCs.
Powertrain > Engine > Trouble Codes
NOTE:If P0630-51 is output, the VIN must be written to the ECM using the GTS. However, all DTCs are cleared automatically by the GTS when the VIN is written. If DTCs other than P0630-51 are output, troubleshoot them first.
Result
Result Proceed to DTC P0630-51 is output A DTC P0630-51 and other DTCs are output B
Result:
B
GO TO DTC CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART [03/2022 - 03/2023] , or Refer to DIAGNOSTIC TROUBLE CODE CHART [03/2023 - 03/2024] , or Refer to DIAGNOSTIC TROUBLE CODE CHART [03/2024 - ]
Result:
A
See step 2
- WRITE VIN
Refer to REGISTRATION [11/2021 - ]
Result
Proceed to NEXT Result:
NEXT
END