DTC P0606-94: Control Module Processor Unexpected Operation [03/2022 - ]: Wiring Diagram

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P2120-12.

Refer to DTC P2120-12: Throttle/Pedal Position Sensor/Switch "D" Circuit Short to Battery; DTC P2120-14: Throttle/Pedal Position Sensor/Switch "D" Circuit Short to Ground or Open; DTC P2120-1C: Throttle/Pedal Position Sensor/Switch "D" Circuit Voltage Out of Range; DTC P2120-1F: Throttle/Pedal Position Sensor/Switch "D" Circuit Intermittent; DTC P2120-99: Throttle/Pedal Position Sensor/Switch "D" Exceeded Learning Limit; DTC P2125-12: Throttle/Pedal Position Sensor/Switch "E" Circuit Short to Battery; DTC P2125-14: Throttle/Pedal Position Sensor/Switch "E" Circuit Short to Ground or Open; DTC P2125-1F: Throttle/Pedal Position Sensor/Switch "E" Circuit Intermittent; DTC P2138-2B: Throttle/Pedal Position Sensor/Switch "D"/"E" Voltage Correlation Signal Cross Coupled [03/2022 - ]