DTC P0460-2A: Fuel Level Sensor "A" Signal Stuck In Range [11/2021 - 03/2022]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.

INTERVIEW THE CUSTOMER

Interview the customer for details about when they refuel the vehicle.

HINT:

When the fuel tank is full, if the vehicle is repeatedly driven a short distance and then refueled, the fuel sender gauge output value will not change. In this case, the ECM may judge that the fuel sender gauge is stuck and store DTC P0460-2A. If the vehicle was driven in this manner, as the DTC was stored due to a user action, clear the DTCs without performing troubleshooting and return the vehicle to the customer.

Result

Proceed to
NEXT

Result:

See step 2

INSPECT FUEL SENDER GAUGE ASSEMBLY
Refer to PROCEDURE - Step 1

Result

Proceed to

OK

NG

Result:

NG

REPLACE FUEL SENDER GAUGE ASSEMBLY

Refer to REMOVAL [11/2021 - ]

Result:

OK

See step 3
INSPECT NO. 2 FUEL SENDER GAUGE ASSEMBLY
Refer to PROCEDURE - Step 2

Result

Proceed to

OK

NG

Result:

OK

CHECK FOR INTERMITTENT PROBLEMS. Refer to CHECK FOR INTERMITTENT PROBLEMS [11/2021 - ]

Result:

NG

REPLACE NO. 2 FUEL SENDER GAUGE ASSEMBLY. Refer to REMOVAL [11/2021 - ]