DTC P0335-1F: Crankshaft Position Sensor "A" Circuit Intermittent; DTC P0335-2A: Crankshaft Position Sensor "A" Signal Stuck in Range; DTC P0335-31: Crankshaft Position Sensor "A" No Signal [03/2023 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0335-11.

Refer to DTC P0335-11: Crankshaft Position Sensor "A" Circuit Short to Ground; DTC P0335-15: Crankshaft Position Sensor "A" Circuit Short to Battery or Open [03/2023 - ]

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Note
P0335-1F	Crankshaft Position Sensor "A" Circuit Intermittent	Under conditions (a), (b) and (c), no crankshaft position sensor signal to ECM for 0.05 seconds or more (1 trip detection logic): (a) Engine speed is 1000 rpm or higher. (b) Starter signal is off. (c) 3 seconds or more have elapsed since the starter signal switched from on to off.	Open or short in crankshaft position sensor circuit Crankshaft position sensor Crankshaft position sensor plate ECM	Does not come on	SAE Code: P0339 DTC for Mexico Models: Applies
P0335-2A	Crankshaft Position Sensor "A" Signal Stuck in Range	No crankshaft position sensor signal to the ECM while cranking (1 trip detection logic).	Open or short in crankshaft position sensor circuit Crankshaft position sensor Crankshaft position sensor plate ECM	Comes on	SAE Code: P0335 DTC for Mexico Models: Applies
P0335-31	Crankshaft Position Sensor "A" No Signal	The engine stalls and the engine speed signal value decreases rapidly (1 trip detection logic).	Open or short in crankshaft position sensor circuit Crankshaft position sensor Crankshaft position sensor plate ECM	Comes on	SAE Code: P0335 DTC for Mexico Models: Applies

Reference: Inspection using an oscilloscope.
Refer to DTC P0335-11: Crankshaft Position Sensor "A" Circuit Short to Ground; DTC P0335-15: Crankshaft Position Sensor "A" Circuit Short to Battery or Open [03/2023 - ]