LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Control System - Diagnostic Codes (P0088-P0110)) >> SFI System >> DTC P0088-00: Fuel Rail / System Pressure - Too High [03/2022 - ] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
Monitor runs whenever the following DTCs are not stored None
Fuel pressure sensor (for high pressure side) malfunction (P0192, P0193) Not detected
High pressure fuel pump malfunction (P1235) Not detected
Fuel injector driver malfunction (P0201, P0202, P0203, P0204, P062D) Not detected
Time after engine start 0.2 seconds or more