LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Emission Control System - Service Information) >> PCV Valve >> On-Vehicle Inspection [11/2021 - ] >> Procedure

On-Vehicle Inspection [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) 
    1. GTY1078149Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove No. 1 engine cover sub-assembly.
      2. Start the engine.
      3. Slide the clip and disconnect the No. 2 ventilation hose from the air cleaner hose assembly.
      4. Check that air is sucked into the No. 2 ventilation hose.

        Standard

        Air is sucked into the No. 2 ventilation hose.

        If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).

scientia non olet · About LEMON Manuals