LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Automatic Transaxle System - Diagnostic Codes (3 Of 3) & Circuit Tests) >> Automatic Transaxle System >> DTC P2756-7F: Torque Converter Clutch Pressure Control Solenoid Control Actuator Stuck Off [11/2021 - ] >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2025 Lexus NX 350, 2024 Lexus NX 350, 2023 Lexus NX 350, and 2022 Lexus NX 350. However, it is still accessible from the selected car via links, so may be relevant.
OFF MALFUNCTION

Engine speed - Turbine speed 170 rpm or more

ON malfunction 

  1. Any of the following conditions are met: ON malfunction (A), (B) or (C)
    ON MALFUNCTION (A)

    l Engine speed - Turbine speed l Less than 35 rpm
    ON MALFUNCTION (B)

    Neutral state flag ON
    ON MALFUNCTION (C)

    Solenoid (SLT) valve ON malfunction

HINT: 

NEUTRAL STATE FLAG:

Turbine speed - output speed x (ECM selected gear ratio) 1000 rpm or more