On-Vehicle Inspection [11/2021 - ]: Procedure
WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE V-RIBBED BELT
Refer to REMOVAL [11/2021 - ]
- INSPECT GENERATOR PULLEY WITH CLUTCH
- Check that the generator pulley with clutch operates in accordance with the following table.
Counterclockwise Clockwise Standard
Counterclockwise Clockwise Spins Freely Lock HINT:
If the generator pulley with clutch does not turn smoothly, does not operate as specified, or an abnormal sound is output, replace it with a new one.
- Check that the generator pulley with clutch operates in accordance with the following table.
- INSTALL V-RIBBED BELT
Refer to INSTALLATION [11/2021 - ]