Installation [11/2021 - ]: Procedure
WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL GENERATOR ASSEMBLY
Torque: 25 N*m (255 kgf*cm, 18 ft.*lbf)
- INSTALL ENGINE WIRE
Bolt
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
Nut
Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
- INSTALL V-RIBBED BELT
Refer to INSTALLATION [11/2021 - ]
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Refer to PROCEDURE - Step 5
- INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
HINT:
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.