DTC P18B5-62: Gear Shift Actuator "A" Phase U-V-W Current Sensor Signal Compare Failure; DTC P18B9-62: Gear Shift Actuator "B" Phase U-V-W Current Sensor Signal Compare Failure [11/2021 - ]: Description
WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.
The shift actuator ECU monitors the ECU internal operation, and if a malfunction is detected, the ECM stores a DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|---|
| P18B5-62 | Gear Shift Actuator "A" Phase U-V-W Current Sensor Signal Compare Failure | When the BAT1 terminal voltage is a certain value or more, the total value of the actuator motor current sensor for phase U, V and W exceeds a certain value continuously (1 trip detection logic) |
Shift control actuator assembly (shift actuator ECU) | Does not come on | Multi-information Display Error Message
|
Transmission | A | SAE: P18B5 |
| P18B9-62 | Gear Shift Actuator "B" Phase U-V-W Current Sensor Signal Compare Failure | When the BUB1 terminal voltage is a certain value or more, the total value of the actuator motor current sensor for phase U, V and W exceeds a certain value continuously (1 trip detection logic) |
Shift control actuator assembly (shift actuator ECU) | Does not come on | Multi-information Display Error Message
|
Transmission | A | SAE: P18B9 |