DTC P0914-2B: Gear Shift Position Circuit "A" Range/Performance Signal Cross Coupled [11/2021 - ]: Description

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.

The shift actuator ECU monitors the ECU internal operation, and if a malfunction is detected, the ECM stores a DTC.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Warning Indicate	DTC Output from	Priority	Note
P0914-2B	Gear Shift Position Circuit "A" Range/Performance Signal Cross Coupled	Either of the following is met: When BAT1 voltage is normal, an absolute angle sensor value malfunction continues for a certain amount of time When the BUB1 terminal voltage is a certain value or more, a CAN communication malfunction is detected between the microcomputer (system 1) and microcomputer (system 2) (1 trip detection logic)	Shift control actuator assembly (Shift actuator ECU) Transmission floor shift assembly (shift control ECU) Wire harness or connector	Comes on	Multi-information Display Error Message Displayed	Transmission	B	SAE: P0915