LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Electronic A/T Shift Lever System - Diagnostic Codes & Circuit Tests) >> Electronic Shift Lever System >> DTC P08A6-62: Gear Lever Position Sensor Signal Compare Failure [11/2021 - ] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2025 Lexus NX 250, 2024 Lexus NX 250, 2023 Lexus NX 250, and 2022 Lexus NX 250. However, it is still accessible from the selected car via links, so may be relevant.

The shift lever assembly has 3 built-in shift sensors.

If the shift control ECU detects a large difference between the angle information of the shift sensors, the shift control ECU determines that the shift sensor is malfunctioning and the ECM stores a DTC and the MIL illuminates.

scientia non olet · About LEMON Manuals