LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2025 >> NX 350h >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Pump >> Installation [11/2021 - ] >> Procedure

Installation [11/2021 - ]: Procedure

  1. INSTALL ENGINE BALANCER ASSEMBLY 

    Refer to PROCEDURE - Step 6 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 6 [03/2022 - 03/2024] , or refer to PROCEDURE - Step 6 [03/2024 - ]

  2. INSTALL STIFFENING CRANKCASE ASSEMBLY 
    Refer to PROCEDURE - Step 7 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 7 [03/2022 - 03/2024] , or refer to PROCEDURE - Step 7 [03/2024 - ]
  3. INSTALL OIL PUMP ASSEMBLY 

    Torque: 24 N.m (245 kgf/cm, 18 ft.lbf) 

  4. INSTALL OIL PUMP BRACKET 

    Refer to PROCEDURE - Step 9 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 9 [03/2022 - 03/2024] , or refer to PROCEDURE - Step 9 [03/2024 - ]

  5. INSTALL ENGINE OIL LEVEL SENSOR 
    See step  1
  6. INSTALL OIL STRAINER SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 11 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 11 [03/2022 - 03/2024] , or refer to PROCEDURE - Step 11 [03/2024 - ]
  7. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 12 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 12 [03/2022 - 03/2024] , or refer to PROCEDURE - Step 12 [03/2024 - ]
  8. INSTALL TIMING CHAIN COVER ASSEMBLY 

    Refer to INSTALLATION [11/2021 - 03/2022] , or refer to INSTALLATION [03/2022 - ]

scientia non olet · About LEMON Manuals