Removal [11/2021 - ]: Procedure
- REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Refer to PROCEDURE - Step 2 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 2 [03/2022 - 03/2024] , or refer to PROCEDURE - Step 2 [03/2024 - ] - REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 3 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 3 [03/2022 - 03/2024] , or refer to PROCEDURE - Step 3 [03/2024 - ] - REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
Refer to PROCEDURE - Step 1
- REMOVE SHIFTING HOLE COVER ASSEMBLY
Refer to PROCEDURE - Step 5 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 5 [03/2022 - 03/2024] , or refer to PROCEDURE - Step 5 [03/2024 - ]
- REMOVE CONSOLE BOX HOLE COVER
Refer to PROCEDURE - Step 6 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 6 [03/2022 - 03/2024] , or refer to PROCEDURE - Step 6 [03/2024 - ]
- REMOVE NO. 2 CONSOLE UPPER PANEL GARNISH
Refer to PROCEDURE - Step 7 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 7 [03/2022 - 03/2024] , or refer to PROCEDURE - Step 7 [03/2024 - ]
- REMOVE CONSOLE PANEL
Refer to PROCEDURE - Step 11 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 11 [03/2022 - 03/2024] , or refer to PROCEDURE - Step 11 [03/2024 - ]
- REMOVE UPPER CONSOLE BOX
Refer to PROCEDURE - Step 12 [11/2021 - 03/2022] , or refer to PROCEDURE - Step 12 [03/2022 - 03/2024] , or refer to PROCEDURE - Step 12 [03/2024 - ]
- REMOVE BLE INDOOR DIGITAL KEY RECEIVER ASSEMBLY NOTE:
Be careful when removing the digital key receiver. If the digital key receiver is dropped, replace it with a new one.